Technical description is applied to steeried to streering control fingers 102-3405103,102-3405112,102-3405112-01(hereinafter-fingers)for tractors by Minsk Tractor Works, the reguirements to which are established by the present technical description and the relevant disign documentation.
Description of the product
The fingers are part of the steering linkage of the tractor and are installed in the lugs of the hydrocylinder,which serves for translation of motion through levers to streering geometry. The product is intended to complete the node points and replace the appropriate spare parts in tractors by Minsk Tractor Works.
As a material for fingers, steel 40X GOST4543 is used.
Delivery for configuration:
Delivery as spare parts:
|Bore diameter,mm||Fastening thread M1,mm||Fastening thread M2,mm||Finger length,mm||Taper||Weight,kg||
(name of combined products)
|28 f9||М24х2||М20х1,5||133||1:8||0,495||1221/3,1222/В/Т,1221, 1523/В,1523.3,2023.3,
JSC“Grodno Plant of Lathe Chucks “BelTAPAZ” produces self-centering lathe chucks, meant for installation on all-purpose lathe machines, turret lathes, internal grinding machines, dividing heads and various accessories.
JSC “Grodno Plant of Lathe Chucks “BelTAPAZ” produces more than 100 modifications self-сentering spiral-rack chucks of 2, 3, 4, 6-jaw with outer diameter from 80 to 500 mm.
JSC «BelTAPAZ» has certified quality management system for design and production of lathe chucks in accordance with the requirements of STB ISO 9001-2009. There is a conformance certificate № РОСС BY. MM03.H04770.
Chucks with jaws departure limiter comply with international safety standards GOST R ISO 16156.